Mercury UPS 1000VA/600W \ ELITE1000PRO

Model ELITE1000PRO

Hard Disk Power Capacity (VA): 1000VA/600W

Input voltage 220VAC

Frequency input 50 Hz

The input stage is single stage

Input jack with FUSE

Cold start (0~100% load) Press ON/OFF key

Input range (220V) 140V ~ 285V

Natural frequency 50 Hz

Rating output (VA) 1000VA

Rating Output (W) 600W

Waveform Battery Mode (Simulated Sine Wave)

AC Mode (Sine Wave)

Power factor 0.6

Voltage rating 220V

Output range 220VAC+17~22%

(No Load Connected)

3x IEC rear output jack – battery backup

Transfer time 8ms typical (15ms max)

Short Circuit Protection Line Mode  FUSE & Software Protection

100%~120% (gives alarm and shuts down in 3 minutes)

120%~130% (beep alert and shut down in 30s)

> 130% (close immediately)

Battery protection mode controlled by CPU software

100%~110% (gives alarm and shuts down in 10s)

> 110% (shut down immediately)

Battery rating and operating time 12V/9AH x1

Battery and Operating Time Typical backup time 8 minutes ~ 20 minutes

Battery and current operating time change 1.5A (max)

Battery charging and operating time > 14.8V±0.5 (off charge)

Battery protection and run time <13.5V±0.5(recharge)

Weight (kg) 7.5

Warranty 1 year

Color: Silver

Dimension (mm) 370 x 145 x 230

Master Carton (mm) 393 x 310 x 267 (2pcs)

Output frequency rating 50 Hz

Output Line Mode Synchronize

with the Utility

Output Battery Mode 50Hz±1Hz